177 Royalty-Free Audio Tracks for "Spinning Record"

Couldn't quite find exactly the sound i was looking for so i made it myself. It's intended to sound like a revolver spin for a video game special move, including a little handling noise at the end. Ratchet recorded with rode ntg4+.

This is cheap table fan spinning around and moving from left to right. Recorded from top of the fan controllers with nokia 6. 2. Android phone. No processing, just boosted in audacity.

Sound of a spinning ashtray. Cheap home recording, no processing.

A test recording of a top-loading washing machine accelerating to 1000rpm on its final spin cycle. Note that it's not as high-quality as i would've liked, but i'll try again soon. Recorded with an oppo reno 8 lite 5g phone and edited with audacity. You may also hear birds chirping, which i had trouble editing out with this recording. The machine in question is a fisher & paykel quicksmart 5. 5kg (mw513) running on 240v 50hz power. This machine utilises a "direct drive" bldc motor instead of the traditional induction motor and pulley.

Here's the sound of my dell portable dvd drive spinning up, reading and spinning down. Recorded with realtek hd audio microphone.

Almost (!) empty bottle of afri cola spinning and turning on wood floor, stereo recording.

Recorded with rode m5 by philipp grzemba.

I recorded this sound back in 2002. Recorded a 35mm projector running.

Spinning 3 inch diameter x 1/8 inch thick aluminum disc on a granite plate. Recorded in stereo with an edirol r44 recorder and rode nt4 microphone.

Spinning a 3 inch diameter x 1/8 inch thick aluminum disc on a linoleum table. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

Da spoke, da spins, da storted. Field recording of a bike tire spinning, ran through several different custom distortions.

Spinning a 3 inch diameter x 1/8 inch thick aluminum disc on a steel plate. Recorded in stereo with an edirol r44 recorder and rode nt4 microphone.

A small metal top is set spinning on the metal bottom of a large coffee canister. Recorded from inside the canister using a tascam dr-40x.

The sound of a game spinner using a chopstick and cloth.

Recorded with a tascam dr-05. Just an angle grinder spinning.

Spinning 3 inch diameter x 1/8 inch thick aluminum disc on a ceramic plate. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

Spinning 3 inch diameter x 1/8 inch thick aluminum disc on a glass table. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

Drill spinning in open air (not actually screwing anything). If it can matter, it's a jobmate power drill. Recording equipment: samson c01u usb microphone.

I've recorded the cd drive as it is trying to read a disc and it sounds beautifulgive it a listen and if you liked it and wanted to share it with your friends don't forget to credit :'). Recorded with redmi note 7. No edits. Tw:@muhammedsabbagh.

Stereo-recording at home from my external hard-disk drive, power is switched on and the disk starts to spin until it stops.

This is the sound of a large bottle cap being spun around in a table. Recorded with a sound devices mixpre3ll and a matched set of audio technica at943 microphones.

Metal coin spinning on a metal bucket recorded with a zoom h5.

First try on recording with the ios zoom microphone iq7 m/s.

Coin rolling on the floor recorded with tascamdr07.

Record with kamera mic, interior old farmhouse at hjerl hede, renactment of life 1700 denmark:male, females and teenagers nitting, spinning wool, and talking danish dialec *fynsk.

Winding the hand crank of a 1909 tabletop victor ii phonograph and letting the turntable spin. Recorded with a tascam dp-24sd using two akg c 414 b-uls mics.

A close up recording of an overheating usb slot-loading cd/dvd drive that repeatedly tries to spin up, but fails and makes some clicking noises. Note on low frequency sounds: i recorded this with a zoom h1n recorder at about 2cm distance from the drive slot. I held the recorder in my hand and rested my hand on the surface the cd drive was resting on, so there is somewhat of a mechanical connection between the drive's vibrations and the recorder. I believe this led to the low frequency parts of the recording. About halfway through the recording, i lifted the drive up with my other hand and held it at a 30degree angle to the surface and recorder. As you can hear in the recording, this made it spin up a little longer before failing and spinning back down.

Recorded in 2008 in the "museo del patrimonio industriale" in bologna (italy) - using h4 zoom recorder.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

It's a light spinning top that you have to magnet to its launcher. It must then be rotated around the base of the launcher before ejecting it. When it spin, it lights up. Recorded with olympus ls-p4 onboard microphones.

Sound recorded inside small sightseeing helicopter. Engine spins up, sound of blades, flight.

Edirol field recording, i span around a bit near the generator, sounds cool.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

Close mic'd angle grinder spinning freely. Recorded in acoustically treated booth.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

A piece of balsa wood being struck and left to resonate. Recorded for frequency analysis of the partials that resonate in the different shape/size pieces. Also for there occasional spinning gestures, as they rotate in the air after being struck.

I got hit by a spinning firecracker that decided to run into me while recording my other firecracker sounds. In the middle of the clip it sounds like someone stepping on old wood planks. Maybe someone will have some use for this sound.

I recorded this sound back in 2002. Using a toy top, we spun it and waited for it to wine down.

Washing machine washing and rincing (no spin-drying). Recorded with zoom h4n on 2014-08-20.

This is the source recording for my first sound made for my "a sound design everyday" project. Every day i will record a sound and then create designs, collages, and lil' music tidbits using the source recording and only the source recording. For this sound, i flipped my bike upside down and used various objects to press against the spinning tires. You can hear the full sound design piece at soundcloud:. Http://soundcloud. Com/standingwave/everyday_050113. Or explore this pack to hear a sampling of the sounds generated from this source.

This is a recording of laptop fan. Recorded with mobile phone camera. Keep volume down so you don't hurt your ears.

Setting off a spinning "bee" type firecracker which then falls to the ground in a bush.

Rotating a swivel chair. Mic: neumann tlm-103. Recorded on an api legacy console.

Sound of a fidget spinner spinninng. Recorded with an iphone se and edited with goldwave.

Nissan skyline sports car, whilst recording some passes - i decided to hitch a ride with the driver and grab some internals. . As you can see he tries to impress me an spins the car out. . Near death moment- i have to ask him to slow down for the next take!. .

Looped sound of a bike wheel spinning while i'm rotating the cranks by hand. Recorded using zoom h1.